toilet troubleshooting

Featured, Plumbing

Toilet Flapper Troubleshooting

Toilet Flapper Troubleshooting | Air Assurance

A malfunctioning toilet flapper can prevent your toilet from working correctly. If your toilet is running or won't flush like it should, check for some common signs that will help you pinpoint the problem.

The Toilet Won't Stop Running

Your toilet flapper's job is to rise up from the flush valve and let water into the bowl when you flush, then drop down and stop the flow of water when the flush ends. As the flapper wears out, it can warp, harden or deteriorate and no longer form a tight seal. When this happens, it can't completely stop the flow of water. This leaves you with a toilet that runs constantly and wastes water.

First, make sure the toilet flapper chain isn't so long it's getting tangled and stopping the flapper from closing or so short that it's holding the flapper up off the flush valve. If this isn't the issue, adding a few drops of food coloring to the toilet tank will help you detect a leak. After you add the coloring, wait 10 minutes and if you find the color has seeped into the bowl, you have a leaky flapper you'll need to replace.

The Toilet Won't Flush Correctly

Your toilet flapper chain should have just a slight amount of slack. A chain that's too short will cause the flush to cut off too soon, leaving too little water in the bowl or even fail to fully clean the bowl. A short flush can also happen when the chain is too long. In this case, the rushing water pulls the flapper closed before the flush is complete.To check for this toilet problem, remove the tank lid and watch the toilet flapper as you flush. The flapper should start to drop when around 80 percent of the water has left the tank. If it doesn't, readjust the chain by unhooking it from the flush lever and shortening or lengthening it as needed by two links.

For help with your toilet or any other plumbing fixture, contact us at Air Assurance anywhere around Broken Arrow.

Our goal is to help educate our customers in the Tulsa and Broken Arrow, Oklahoma area about energy and home comfort issues (specific to HVAC systems). Credit/Copyright Attribution: “gmstockstudio/Shutterstock”