gas smell

Furnaces

5 Reasons You Need An Annual Furnace Tune-Up - Air Assurance

Top 5 Reasons for Furnace Maintenance Tune Up

Top 5 Reasons to schedule your annual furnace service with Air Assurance and stay ahead of any seasonal breakdowns. Neglect is the number #1 reason why mechanical system fail.

Energy Savings - With the system clean, filter changed, gas pressures set correctly….it can mean the difference in your comfort and the performance on your utility savings during the fall and winter months.

Safe Operation - AC clean and check service is all about efficiencies. But the furnace check is all about safety. Safety from fire. Safety from Carbon Monoxide potentials and more.

Early Detection - You don’t wait until you have a flat tire on the highway to buy new tires right? When you notice the tread wearing and the tire becoming bald it affects performance. Stay ahead of any potential break downs this season.

Optimize Performance - Our technicians will use a combustion analyzer to determine how efficient you furnace is operating….and we can make adjustments to make sure you get the best performance.

Peace of Mind - We check over 25 items during our heating and furnace check to give you comfort and peace of mind.

Call Air Assurance to inquire or schedule your AC or Furnace clean and check maintenance service today!

Air Assurance Company

Serving Tulsa, Broken Arrow, Jenks, Sapulpa, Owasso, and more. Call Today!

Furnace Maintenance

The furnace burner is the heart of your central heating system. It’s the component that mixes air with natural gas and produces a clean-burning, high-temperature flame that generates heat for the whole house. A clean, intact furnace burner also ensures maximum fuel efficiency and low operating costs while minimizing the amount of combustion byproducts, including dangerous carbon monoxide. Here are some details about the process:

The Burner Cycle

In a typical gas-fired furnace, heating and burner operation are divided into several stages:

  • Signaling for Heat. When the household temperature drops below the thermostat setting, the furnace receives a signal to initiate heating from the system thermostat.

  • Fuel Delivery. The furnace fuel valve opens to start the flow of natural gas to the burner. At the same time, air from the furnace air intake blends with gas flow to provide the right mixture for clean, safe ignition and combustion.

  • Ignition. The mixture of natural gas and air is ignited at the burner. Ignition may be provided by a pilot light — a small flame that runs continuously — or, more commonly in newer furnaces, by an electric igniter that produces a spark.

  • Heat Transfer. Heat produced by the burner enclosed within the combustion chamber is added to the HVAC system's airflow by the heat exchanger. This vital component incorporates air passages to transfer heat efficiently to the airflow while sealing out dangerous gases.

  • Heated Air Circulation. Heated air is pulled into the ductwork by the system blower and distributed throughout the house and into each individual room through supply air vents.

  • Burner Shutdown. When household temperatures reach the desired setting, the thermostat sends a signal to shut off gas flow until temperatures drop again and the heating cycle repeats.

Furnace Burner Maintenance

Checking the burner is a critical part of annual furnace maintenance by a qualified HVAC contractor. The technician can verify proper burner operation by sampling and analyzing combustion gases. The burner in a gas furnace may require professional cleaning at intervals to support efficient and safe operation. 

For more about furnace burner operation and annual professional furnace maintenance, contact Air Assurance

Furnaces

Top Reasons For Furnace Clean & Check Service

Air-Assurance-HEAT-2021.png

Top Reasons for Furnace Maintenance

Top 5 Reasons to schedule your annual furnace service with Air Assurance and stay ahead of any seasonal breakdowns. Neglect is the number #1 reason why mechanical system fail.

Energy Savings - With the system clean, filter changed, gas pressures set correctly….it can mean the difference in your comfort and the performance on your utility savings during the fall and winter months.

Safe Operation - AC clean and check service is all about efficiencies. But the furnace check is all about safety. Safety from fire. Safety from Carbon Monoxide potentials and more.

Early Detection - You don’t wait until you have a flat tire on the highway to buy new tires right? When you notice the tread wearing and the tire becoming bald it affects performance. Stay ahead of any potential break downs this season.

Optimize Performance - Our technicians will use a combustion analyzer to determine how efficient you furnace is operating….and we can make adjustments to make sure you get the best performance.

Peace of Mind - We check over 25 items during our heating and furnace check to give you comfort and peace of mind.

Call Air Assurance to inquire or schedule your AC or Furnace clean and check maintenance service today!

aa small van 2.png

Air Assurance Company

Serving Tulsa, Broken Arrow, Jenks, Sapulpa, Owasso, and more. Call Today!

Furnace Maintenance

The furnace burner is the heart of your central heating system. It’s the component that mixes air with natural gas and produces a clean-burning, high-temperature flame that generates heat for the whole house. A clean, intact furnace burner also ensures maximum fuel efficiency and low operating costs while minimizing the amount of combustion byproducts, including dangerous carbon monoxide. Here are some details about the process:

The Burner Cycle

In a typical gas-fired furnace, heating and burner operation are divided into several stages:

  • Signaling for Heat. When the household temperature drops below the thermostat setting, the furnace receives a signal to initiate heating from the system thermostat.

  • Fuel Delivery. The furnace fuel valve opens to start the flow of natural gas to the burner. At the same time, air from the furnace air intake blends with gas flow to provide the right mixture for clean, safe ignition and combustion.

  • Ignition. The mixture of natural gas and air is ignited at the burner. Ignition may be provided by a pilot light — a small flame that runs continuously — or, more commonly in newer furnaces, by an electric igniter that produces a spark.

  • Heat Transfer. Heat produced by the burner enclosed within the combustion chamber is added to the HVAC system's airflow by the heat exchanger. This vital component incorporates air passages to transfer heat efficiently to the airflow while sealing out dangerous gases.

  • Heated Air Circulation. Heated air is pulled into the ductwork by the system blower and distributed throughout the house and into each individual room through supply air vents.

  • Burner Shutdown. When household temperatures reach the desired setting, the thermostat sends a signal to shut off gas flow until temperatures drop again and the heating cycle repeats.

Furnace Burner Maintenance

Checking the burner is a critical part of annual furnace maintenance by a qualified HVAC contractor. The technician can verify proper burner operation by sampling and analyzing combustion gases. The burner in a gas furnace may require professional cleaning at intervals to support efficient and safe operation. 

For more about furnace burner operation and annual professional furnace maintenance, contact Air Assurance