Proper Attic Insulation Can Save Money and Energy this Season

Attic insulation estimates - tulsa ok

Good attic insulation is one of the easiest ways to keep Broken Arrow's freezing winters from stealing your comfort. By reducing the load on your furnace, insulation also helps hold down your heating bills.

The Importance of Attic Insulation

The warm air from your furnace naturally rises toward your ceiling. Without sufficient air sealing and insulation in the attic, that warmth will flow into the attic and then through the roof. This not only wastes heat, it also contributes to moisture and mold issues in the attic and ice dams that could damage your roof. To keep your home warm and free from damage, your attic should have at least an R-38 layer of insulation, which requires around 12 inches of fiberglass batts. For even greater energy efficiency, add more insulation to achieve an R-60 layer.

Choosing the Right Insulation

Insulation is available in two forms and a number of different materials. Every type of insulation has pros and cons, so review your options before you decide how to improve your attic insulation. Your options include:

Batt insulation — These strips are cut to fit between floor and wall joints, making them easy for a non-professional to lay into place. Batts are produced in fiberglass, cellulose, mineral wool, plastic fiber, cotton, and sheep's wool, among other materials. Fiberglass and cellulose are the most efficient of these, but mineral wool helps more with noise reduction.

Loose-fill (blown-in) insulation — Produced as small pieces of material designed to be installed using a blower machine, loose-fill insulation fills in small corners better than batts, so it insulates more efficiently. On the downside, you'll need to rent a blower machine or hire a professional for insulation.

Rigid foam — These stiff boards of polystyrene or other foam can be set into place without special equipment. While they're highly efficient and moisture resistant, the higher cost compared to batts or loose-fill makes them less popular for use in attics.

If you could use professional help to improve your attic insulation, contact us at Air Assurance in the Broken Arrow area.

Our goal is to help educate our customers in the Tulsa and Broken Arrow, Oklahoma area about energy and home comfort issues (specific to HVAC systems). Credit/Copyright Attribution: “irin k/Shutterstock”

Sealing Those Air Leaks? Don't Neglect The Attic Hatch

Taking steps to prevent air infiltration helps your energy bills -- and home comfort. But when you’re undertaking this kind of project, if you neglect to address your home’s attic hatch, you’ll likely counteract any measures that you take to keep heated air inside of your home.When sealing air leaks in your home, it’s important to evaluate the outer perimeter of your home, such as its walls, an area where air typically enters the home. You can use caulk to seal areas around window frames, doors, electrical outlets and plumbing protrusions.However, one of the main ways that homes lose conditioned air is through the attic, or crawl space, so you’ll also want to pay attention to these spaces. Seal air leaks that exist in the attic where walls abut other walls, the ceiling and floor. Pay close attention to plumbing and electrical elements that penetrate the attic floor.  Canned lights are a huge area where improvements can be made.If your home has an attic hatch, efforts to seal this access point will pay off. An attic hatch is generally constructed from a flat piece of plywood, which doesn’t offer much by way of protection.Here’s what you can do to prevent air infiltration into the attic via the attic hatch:

• Apply insulation to the door. Make sure it adheres by using duct or foam tape.

• The ideal insulation material to use is something durable and rigid, since you’ll be accessing the attic through the hatch. Rigid foam insulation works well.

• Seal air leaks that may occur around the frame of the attic itself.

If your home has stairs that you can pull down from the attic, you can purchase an attic tent to do seal off the space, generally installed on the attic side of the home.Ensure that your home can resist the movement of heated air out of your home, and be sure to pay attention to your attic hatch as well. For help with this project, or any other heating and cooling needs, contact Air Assurance Heating, Cooling & Air Quality -- serving homeowners in the Greater Broken Arrow area for more than 30 years.Our goal is to help educate our customers about energy and home comfort issues (specific to HVAC systems). Air Assurance services Tulsa, Broken Arrow and the surrounding areas. Visit our website to see our current promotions and get started today!     

Attic-Sealing Strategies Give Tulsa Area Residents A Solid Plan For Efficiency

Energy costs on the rise? Perhaps these attic sealing strategies can help put you on the road to energy efficiency.Roof LeaksA leaky roof can lead to a variety of problems, including:

• Water damage.

• Wood rot.

• Mold growth.

• Soaked, ineffective insulation.

With this in mind, perhaps the first step in your attic sealing strategy should be to seal off roof leaks with the appropriate flashing material.Air LeaksAir and moisture can also enter the attic from inside of the home, presenting some of the same moisture issues as roof leaks, while wasting your conditioned air and increasing your annual energy costs. In some homes, this is further complicated by exhaust fans, such as those found in kitchens and bathrooms, being vented directly into the attic. These fans should always exhaust moisture and air directly outside. Of course, most common air leaks occur around wiring, plumbing and ductwork, and are easily addressed using some form of weatherstripping or caulk.VentilationOne of the most important aspects of proper attic sealing is ventilation. While that statement may seem contrary, a well-ventilated attic ensures that moisture and contaminants that do enter the attic have a means of escaping your home. If your attic isn’t properly ventilated, consider adding continuous ventilation.InsulationWith your attic tightly sealed and proper ventilation in place, you can now finish off your attic sealing strategy by boosting your insulation. If you already have three to four inches of existing insulation, consider adding insulation with an R-value of 25-38. If you have no attic insulation at all, you may need R30-R60. For a more accurate assessment, consult a professional.A properly sealed attic will reduce moisture issues, improve household comfort and significantly increase your annual energy savings. For more information on improving the energy efficiency of your household, speak to one of our trained technicians. We're always standing by to serve your heating and cooling needs. For an expert consultation, contact Air Assurancetoday.Our goal is to help educate our customers about energy and home comfort issues (specific to HVAC systems). Air Assurance services Tulsa, Broken Arrow and the surrounding areas. Visit our website to see our current promotions and get started today!     

Broken Arrow Homeowners In Oklahoma Can Avoid Common Air-Conditioner Problems Using These Tips

It’s not uncommon for homeowners to panic when their air conditioner seems to be malfunctioning, especially in the dead heat of a Tulsa, OKlahoma summer. Luckily, many common issues are easily addressed, with most being the direct result of simple, albeit unintentional, neglect.Perhaps the most common issue is a lack of cooling. Often, the cause of this problem is as simple as an improperly programmed thermostat or a thrown circuit breaker.

• Check the thermostat for desired temperature settings and ensure that the cooling system is actually turned on. If everything is as it should be, the next option is to try resetting the thermostat. If this does not correct the issue, a professional assessment is recommended.

• If the culprit is a thrown circuit breaker, resetting the breaker should correct the problem. Of course, if this is a common occurrence, there is likely an underlying electrical issue that needs to be addressed by a professional.

If lack of airflow is the issue:

• Dirty filters can restrict airflow and put a strain on your system in terms of efficiency. If filter replacement doesn’t seem to correct the problem, consult a trained technician.

• If you suspect a frozen indoor coil, try adjusting the thermostat for a few hours to unfreeze the system. If this doesn’t work, contact your HVAC contractor.

Another common complaint is spiking energy costs. This can be the result of several factors, including:

• New appliances

• Extreme summer heat

• Extreme thermostat settings

• Local utility rate increases

If your energy increases can’t be explained away logically, you may be the victim of improper system cycling or some other system malfunction. Of course, the best way to ensure that your system is running properly when you need it most is to maintain a routine preventive maintenance schedule. This allows your technician to evaluate and adjust every aspect of your cooling system, including:

• Proper system cycling

• Thermostat accuracy

• Electrical safety

• Air filter maintenance

• Cleanliness and efficiency of indoor and outdoor coils

• Condensate drains

Last but not least, during extreme temperatures, your system may not be able to keep the temperature as low as it does normally.  This can be due  to several factors:1. Your system may not be sized properly for your comfort.  A professional is needed to do a load calculation on the house to determine the correct size. Maybe your system cooled better in previous years?  Did something change like the loss of a large shade tree or did you replace wood shingles with asphault shingles?  Has your ductwork or insulation been disturbed by remodeling or other services?  Is the system clean?2. Your attic may have inadequate attic ventilation.  With extreme temps comes extreme attic temperatures.  And if your attic can't properly remove the extreme heat, this puts excess heat gain on your home's interior.3. With extreme temperatures come extreme heat on your duct system.  If your ducts are not properly insulated, this can cause your air to "lose it's cool", therefore making your unit run longer and less efficient.4.  What is the level of attic insulation in your home?  If this is not at least 12" you are putting extreme pressure on your system to cool at levels it was probably not designed for.If you’ve been experiencing problems with your air conditioner, don’t wait until the entire system shuts down. Call the trained technicians of Air Assurance today for an expert consultation.Our goal is to help educate our customers about energy and home comfort issues (specific to HVAC systems).  For more information, click here.Air Assurance services Tulsa, Broken Arrow and the surrounding areas. To get started, check out our website or see our current promotions.